CONSTRUCTION KEY NOTES*

1. 8mm hardwood doweled construction.

2. Full 3/4" thick wall cabinet top and bottoms on unit up to 36" wide, full 1" on units wider than 36".

3. Full 3/8" cabinet back, completely captive in cabinet sides, top and bottom. a continuous bead of hot-melt adhesive around parameter of back.

4. Full 3/4" 3-ply, balanced industrial grade particle board cabinet body. Finished two sides white melamine on unfinished cabinets or high pressure laminates with white balance laminate on finished ends.

5. Duel pin adjustable shelf clips.

6. High pressure plastic laminate exterior, heavy duty white colored cabinet liner at interior, Permanently bonded to full 3/4" core.

7. 3/8" stiffener/hanging strip behind back panel.

8. Institutional, five knuckle or concealed hinges as specified.

9. Full 3/4" sub-top.

10. white colored, high wear melamine interior.

11. underside of wall cabinets finished white melamine.

12. 5mm adjustable shelf bores at 32mm on center.

13. Epoxy coated integral drawer slide/drawer side with 3/4" white melamine drawer bottom and back.

14. Continuous 3/4" exterior grade plywood base.

15. Full 3/4" white colored melamine shelves on units up to 36" wide, 1" thick on units over 36".

16. Black vinyl glazing boot on interior side of door.

17. 3/4" hardwood stile and rails covered with high pressure plastic laminate on exterior and white colored cabinet liner on interior.

18. Clear 3/16" safety glass.

19. Continuous plastic "F" pulls.

20. Epoxy coated drawer-side extension rail systems.

21. High impact SYTRON molded trays.

22. Continuous molded side panels. Rib design, one inch spacing.

23. Fixed, full 3/4" white colored melamine shelf.

24. KV #2419 top track with matching laminate face.

25. KV #469 metal bottom track.

26. Flush pull routered into face.

27. Special shelf construction.

      (See page #7-4 of catalog.)

28. Formed steel protective leading edge.

      (See page #7-4 of catalog.)

29. Garment hook.

30. Recessed 1 1/2" diameter metal number disk.

31. Through-door padlock hasp system.

32. 1/4" tempered masonite dividers.

33. Full 3/4" finished support leg. High pressure plastic laminate all exposed surfaces.

34. 2 1/4" high pressure plastic laminate light valance (return at finished ends).